Filter By:
- Parts & Accessories (29)
- Combos/Systems (21)
- Headlights (35)
- Taillights (17)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Lighting
$6.00
The Recon TL Rack mount securely attaches your Recon tail light to your rear rack.
- Bracket securely attaches Recon TL 200 / 100 to a rear rack
- Compatible with Recon TL 200 and Recon TL 100 only
$6.00
Replacement Part – Multi Sport Headlight & Tail Light Bracket
- Works for both headlights & tail lights
- Great for helmet application
- 3 strap sizes allows fitting from 20mm to over 100mm
- Adjusts to fit aero & round seat posts & handlebars
- For lights up to 120 grams in weight
- Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500
$8.00
A unique, innovative clamp system that clips securely and discreetly to your seat rails. Compatible with Recon TL 200 and Recon TL 100 only. Light not included
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
The NiteRider Focus+ Handlebar Clamp Mount is here to deliver an efficient and practical solution to mount your handheld light to your bicycle. It fits a max bar diameter of 35mm. Not intended for mountain terrain or off-road use.
System Compatibility
- Focus+ 370
- Focus+ 545
- Focus+ 1000
Accessory Includes
- Focus+ Flashlight Handlebar Clamp Mount
$9.99
- 32 lumen single LED safety light
- 2 modes - steady and flashing
- 2 CR2032 batteries included
- Water resistant design
$9.99
- 8 lumen, single LED safety light
- 2 modes - solid and flashing
- Up to 110 hour run time with 2 CR2032 batteries (included)
- Multi-fit rubber strap attachment
$10.00
Adapter to suit Giant Recon headlights models to a GoPro mounting System. Compatible with all Giant Recon HL models.
- Adapter to suit Giant Headlights for connection to GoPro mounting Systems
- Compatible with all Giant Recon+ HL models
$10.00
An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.
$10.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$11.75
A versatile, adjustable mount be used with a Giant helmet featuring a GoPro compatible mount surface. Mount your light, and easily switch between Recon headlights and your GoPro camera. Compatible with Recon HL 200 and Recon HL 100 only.
- Compatible with Recon HL 200 and Recon HL 100 only
$11.99
- 80-lumen COB chip LED headlight
- Powered by 2 AAA batteries (included)
- Can be installed horizontally or vertically
- IPX3 water-resistant rating
$11.99
- 20-lumen COB chip LED tail light
- Powered by 2 AAA batteries (included)
- Can be installed horizontally or vertically
- IPX3 water-resistant rating
$12.75
A universal mount that fits standard 22-35mm handlebars and aero-shaped handlebars. An easy on/off rubber strap mount allows quickly switching Recon lights from bike to bike.
- Fits all Recon HL series lights*
- Not compatible with Recon HL 200 and Recon HL 100
$14.99
For those that ride with the sleek performance of Aero handlebars, NiteRider offers a light mounting solution that allows for increased visibility and safety while you're out clocking in those high-speed miles. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while increasing your road visibility with NiteRider Lumina or Mako Series lights and the Aero Handlebar Mount.
Fits all Aero style handlebars.
SYSTEM COMPATIBILITY
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series
$15.00
Replacement Part – Headlight Bracket
- Fits all Serfas headlights
- Long silicone strap allows endless mounting options
- No tools needed
- Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R
$17.00
Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.
$17.49
This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered.
- Made from hi-tech resin and aluminum alloy
- Lightweight accessory holder for handlebar end
- Ideally paired with a bell, light or mirror
- Works with both road and MTB bars
- Minimalist design that does not clutter your bike
$17.95
Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!
$19.99
Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.
$19.99
The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit.
It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
SYSTEM COMPATIBILITY
- Sentinel
- Omega 330
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
- Vmax+ 150
NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS
$19.99
The NiteRider Double Taillight Seat Post Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the clamp mount and rubber shims for that perfect fit. Fits seat posts with a 22mm-34.9mm diameter.
It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
SYSTEM COMPATIBILITY
- Sentinel
- Omega 330
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
- Vmax+ 150
NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS
$19.99
The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights.
System Compatibility
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems
$19.99
NiteRider's Lightning Bug 3.0 features three bright LEDs and three modes: high, low and flashing (for increased daytime visibility). It's all in a tiny, mount-almost-anywhere package that installs without tools.
$19.99
- Combo pack of COB chip LED lights
- 80-lumen head light and 20-lumen tail light
- Can be installed horizontally or vertically
- Powered by 2 AAA batteries (included)
- IPX3 water-resistant rating
$19.99
- High brightness 16 chip COB style LED combo set
- Perfect for increasing safety on commutes and neighborhood rides
- 4 modes including 2 solid setting and 2 flash modes
- USB rechargeable - cable included
- Lumens: 60
$20.00
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
$22.99
- High brightness 16 chip COB style LED light
- 4 modes including 2 solid setting and 2 flash modes
- USB rechargeable - cable included
- Lumens: 30
- Mount: rubber strap
$24.99
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles.
To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options.
- Daylight Visible Flash (DVF)
- A wearable safety light – clip onto various straps, belt loops, etc.
- Visible up to 1 mile
- Internal reflector = visible if light on off mode
- Easily replaceable AAA batteries
- Super bright day time flash mode
- Be Seen by cars = Be Safe
- FL 1 Standard IP64, water resistant
WARRANTY
The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light
- Seatpost Mount
- 2 AAA Batteries
Page 1 of 4
Next page