RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.
Swagman's Trailhead 2 rack is an easy-to-use, sturdy double-arm hitch rack featuring quality steel construction for durability and long life. Swagman's protective anti-sway cradles quickly and easily adjust to safely hold bicycles and prevent bike-to-bike contact. The arms easily fold away when not in use and the rack folds down so you can access the rear of your vehicle.
An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
A simple yet effective and safe solution to carry your kayak. Looking for the ability to carry either a kayak or a canoe? The Coronado, with its 4 padded rotating saddles, allows for easy loading and scratch-resistant travel. The tie-downs along with bow/stern ropes will keep you stable when driving to the water. - Universal mount fits round, square, and 3.5" oval cross bars - Saddles pivot to assist loading - Includes: 4 saddles, 2 tie-down straps with cam lock buckles, plus bow and stern straps
It's not often a bike rack is approved for use on the back of an RV trailer yet comes with everyday functionality when used on a passenger vehicle. The E-Spec is capable of carrying 2 bikes with a weight capacity of 70lbs each anywhere you need to adventure. Locking hooks and a locking pin are included to keep your prized possessions safer. The rack folds up for storage when used on a passenger vehicle. Available fat trays make the rack able to carry up to 5" wide tires. Fits 2" hitch only. - Carries: 1 or 2 bikes - Fits 20" - 29+" bike up to 3" wide tires - Fat tire trays available for 3"- 5" tires - Designed for heavy-duty use, 70lbs per bike capacity - Fits most frame shapes, styles, and sizes - Convertible between a folding e-bike rack and a non-folding RV-approved e-bike rack with the installation of the included bolt (instructions included) - Folds up against rear of the vehicle while not in use - Locking Hooks & Locking Threaded Hitch Pin included - Rack Weight: 63lbs
Swagman's XP 5 rack features a sturdy steel construction for durability and long life. Swagman's protective and secure rubber-lined and knob-tightened cradles safely hold up to five bicycles by their frames. There's even a lock to keep your cargo safe. Plus, the rack tilts down so you can access the back of your vehicle.
Swagman's Traveler XCS2 is ready for adventure! This platform-style rack holds two bikes and is incredibly easy to load. Simply place the wheels in the holders and slide the ratcheting arm down securely on the top tube of your bike. Then, strap the wheels in place with the included straps. The XCS2 is made of steel for excellent stability and durability, has adjustable wheel holders to fit different bike types, and folds up when not in use. This rack fits over a 2-inch towing bar (sold separately).
Transport your bike with ease, thanks to Swagman's Upright Roof Rack. It's simple design grabs onto the downtube of your bike and secures both wheels in place with straps. There's no removing the front wheel, so it's incredibly easy and versatile. The tray fits on round, square, and factory crossbars that are 3-inches wide or less.
The Swagman | E-Spec can be used on a 2" hitch receiver and is capable of carrying two bikes with a weight capacity of 70lbs. per bike anywhere! The E-SPEC comes with locking ratchet hooks and locking hitch pin to keep your prized possessions safe. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 2 eBikes with a maximum weight capacity of 70lbs per bike - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - When being used on a car, truck or SUV it can be folded up - When being used on an RV or Motorhome, the provided RV Bolt is required - Locking Threaded Hitch Pin - Rack Weight: 63lbs
Swagman's Titan 4 is an easy-to-use, sturdy double-arm hitch rack featuring quality steel construction for durability and long life. Swagman's protective anti-sway cradles quickly and easily secure up to 4 bikes and prevent bike-to-bike contact. The arms easily fold down when not in use, and the rack tilts forward so you can access the rear of your vehicle. You also get an integrated 8mm-diameter cable locking system to safeguard your precious cargo.
Swagman’s Enforcer Roof Rack makes getting to your next adventure quick and easy. With aluminum adapters for both 9mm quick-release and 15mm thru-axle forks, it doesn’t matter which bike you bring. Plus, the tray accommodates tires up to 4-inches wide—so you can even bring the fat bike along! The Enforcer fits on round, square, and factory crossbars that are 2.5-inches wide or less.
Swagman's Standard 4-Bike Fold-Down Tow-Mount is an easy-to-use and sturdy single-arm hitch rack at a great price. Quality steel construction ensures durability and long life. Swagman's protective and secure rubber-lined and knob-tightened cradles quickly and easily adjust to safely hold up to four bicycles by their frames. This rack also folds down so you can conveniently access the rear of your vehicle. Plus, it even includes a 3,500-pound rated tow bar for 2-inch receivers/hitches!
Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool
Lightweight aluminum hitch bike rack provides outstanding bike protection and easy-on, easy-off convenience. Features - Super lightweight aluminum construction is half the weight of steel hitch bike racks, providing easy installation, removal, and handling - Unsurpassed hanging hitch carrier bike protection with industry-leading 7" spacing between bikes - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Convenient access to rear of vehicle - HitchSwitch feature allows rack to be easily tilted down - Complete bike security with integrated cable lock (lock included) - Quick, secure and confidence-inspiring bike attachment with ratchet strap cradle strap - Easily fold down bike arms when not in use with conveniently located HitchSwitch lever - Compact cradle design accommodates wide variety of bike sizes/frame styles - Fast, tool-free installation with SnugTite stinger design delivering maximum speed, stability and security (lock included) - Transferable between hitch receivers, fits 1.25" and 2" hitches Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 32 x 11 x 37.3 in - Folded dimensions: 20.7 x 11 x 37.3 in - Weight: 19 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs
Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.
Saris’ Bike Porter Trunk 2-Bike rack is outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
The Swagman PARAMOUNT Pad is our newest addition to the Tailgate Pad lineup. It is designed to be the best tailgate pad in the business. It's a quick, easy, and safe solution for hauling up to 4 bikes in the back of your midsize pickup, depending on their size! This rugged tailgate pad constructed of high-density foam covered with tarpaulin protects your bikes from damage while being an economical and easy way to transport your bikes to the trailhead. - Includes Velcro straps - Stanchion pads prevent your bikes from flopping over onto each other during transport - Mesh gear bags on the inside of the truck to keep all of your gear in one place - Oversized latch access cover to use with as many truck latch placements as possible - Latch access cover with clips to keep it open for use with backup cameras - Nylon webbing for longer lifespan as opposed to poly webbing Full-size Specs: - Fits full-size truck tailgates 61" wide - Carries up to 7 bikes depending on size and spacing Mid-size Specs: - Fits mid-size truck tailgates 54" wide - Carries up to 5 bikes depending on size and spacing
Ultimate bike protection and loading/unloading ease with the MHS Duo Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 60 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheelbases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)
Easily transport two bikes with Swagman's XC 2. This platform-style hitch rack is incredibly easy to load. Simply lift the bike into the wheel holders, secure the ratcheting hook over the top tube, and strap the wheels down. The XC rack is made of steel for excellent stability and durability, features adjustable wheel holders to accommodate different bike types, and folds up when not in use.
- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel
Transport up to two bikes with the Swagman Semi 2.0 Platform Hitch Rack. The platform design requires minimal lifting to load bikes and the ratcheting arms only grab the wheels so your bikes stay secure with zero frame contact. - Integrated locking cable included - Tilts down to allow access to rear-of-vehicle even while bikes are loaded - Carries up to 2 bikes - Fits 1-1/4” and 2” hitch receiver - Fits most frame sizes, shapes, and styles - Patented design - Rear wheel ratchet strap firmly hold bikes and secure wheels - Max. load: 45 lbs. per bike
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
Swagman's Cross-Country Rack makes it easy to transport up to 4 bikes. Simply lift a bike into the wheel holders, secure the ratcheting arm over the frame, and strap in the wheels. The trays can be adjusted to offset the bikes for a convenient fit. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and the rack's center arm folds down so you can access your vehicle.
The G10 Platform Hitch Rack carries one or two bikes and fits either a 1-1/4-inch or 2-inch hitch receiver. - Tilts down to allow access to rear-of-vehicle, even while bikes are loaded - Fits most frame sizes, shapes, and styles - Adjustable hooks secure frame to rack - Wheel ratchet straps firmly hold bikes and secure wheels - Locking hitch pin - Fat tire trays sold separately - Includes 2 same key lock cylinders to lock bike to bike rack - Patented design - Max load: 45 lbs. per bike
Swagman's Grid Lock Trunk Rack is easy-to-use and versatile. It fits a wide variety of cars, hatchbacks, and SUV's. Oversize steel tubing and pliable, conforming anti-sway cradles securely hold your bikes and prevent bike-to-bike contact. The Grid Lock also features reflective end caps and folds for easy storage when not in use.
Prospector pads will cup the gunwales of your canoe. A non-slip finish on one side will help keep your canoe in place on your car roof while transporting it. - Carries: Single canoe - Fits over most canoe gunwales - Ideal for use on a bare car roof - Integrated non-skid underside helps protect vehicle's finish - Includes 4 gunwale pads per kit
This adaptor is for mounting 12mm x 100mm fork onto Swagman's Spire mount. - Durable and rustproof construction - 12mm x 100mm adaptor
If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 1.45 lbs. - Limited Lifetime Warranty
Swagman's Traveler XC2 is ready for adventure! This platform-style rack holds two bikes and is incredibly easy to load. Simply place the wheels in the holders and slide the ratcheting arm down securely on the top tube of your bike. Then, strap the wheels in place with the included straps. The XC2 rack is made of steel for excellent stability and durability, has adjustable wheel holders to fit different bike types, and folds up when not in use.
Want to double the bike-carrying capacity of your Swagman Semi 4.0 bike rack? The Semi 4.0 2-Bike Add-On attaches to the Semi 4.0 (sold separately) for additional bike-carrying capacity. - Zero frame contact - Patented design - Fits 20-inch to 29-inch wheels - Fits most frame sizes, shapes, and styles - Ratcheting arms only grab the wheels - Rear wheel ratchet straps firmly hold the bike by the rear wheel - Carries up to 2 extra bikes - Fits Semi 4.0 (#64698) to create a 4-bike Semi 4.0 - Max. load: 45 lbs. per bike
The Swagman Dispatch is an ideal RV Approved rack for those that have clearance issues on the back of their trailers; sitting 17" away from the hitch pin hole. Capable of carrying 2 bikes of 45 pounds each where you need them. - Fits: 2" Hitch Receiver, Class 3 or higher - Max Load: 45lbs. per bike - Locking hitch pin and cable included - Fits most frame sizes, shapes and styles. Use of a Bar Adapter (#64005 or #63999) required for Step Through/Cruiser style bikes - Designed for increased ground clearance - Adjustable hooks secure frame to rack - Wheel ratchet straps firmly hold bikes and secure wheels - Carries up to 2 bikes - Carrier Weight: 54 lbs - Fat wheel trays available sold separately (64694) - Ideal for an RV or a motor home - Rack Weight: 51lbs
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded
- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter
Swagman's Cross-Country Rack transports 2 bikes safely and securely, so it's always quick and easy to bring your bikes along! Place your bike in the wheel holders, adjust the ratcheting arm, strap the wheels down, and go. The XTC rack is made of steel for excellent stability and durability, features adjustable wheel holders to fit different bike types, and folds down so you can access your vehicle.
The BackStage is the first platform rack that offers full access to the rear of the vehicle. Either empty or with one or two bikes loaded, the rack can be swung to the passenger side for full access to the rear of the car. Perfect for camping, #vanlife, dog owners or anyone that needs full access to the back of the car. RockyMounts tested on RVs, Sprinters, and Chevy Suburbans — the cantilevered arm swings out 41" so it works with all cars and trucks. - Fits tires up to 5.0”, bikes up to 48” wheelbase, wheel diameter 20”-29” - 3” of side-to-side tray adjustment avoids seat to handlebar interference - 13” spacing between bikes allows clearance for all fat bikes, including those with Bluto forks and 197mm rear spacing - 50lb max weight per bike with Add On (150lb max) - No bike frame contact - Compatible with MonoRail Swing and 2” MonoRail - Lifetime warranty
The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.
A Leg Above the Rest The Bones trunk rack made a name for itself in the mid-90's, and 25 years later it's doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that'll last a lifetime. Features - Carries 2 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Get your SUP or surfboard or kayak to the water easier and safer with the Rincon. The pliable saddles conform to your board or boats gently. - Carries: Single SUP or kayak - Dual pivoting saddles allow for easier loading - Includes set of 4 saddles - Additional 10mm bolts included to fit larger diameter cross bars - Padded support conform to the hull for added protection - Universal mount fits round, square, and 4.5" oval cross bars - Includes 2 tie-down straps with padded cam lock buckles, plus bow and stern straps
Swagman's Standard Roof rack is no frills and all function. Simply remove the front wheel and use the included 9mm skewer to secure your fork to the tray. The rear wheel is held in place with a quick-release tie down system. And, the tray fits on round, square, and factory crossbars that are 3-inches wide or less.
Wrap your aftermarket or OEM cross bars with these closed-cell foam pads, covered in UV protected cordura and secured with industrial grade Velcro. These allow you to mount your SUP or other gear directly to the cross bars while keeping them safe from the hard steel/alloy cross bars. - Carries: Single SUP or surfboard - Soft yet firm, high-density padding to protect your surfboard or SUP board - Industrial strength Velcro secures the pads to cross bars
Swagman's RV Ladder Rack makes it easy to take your bikes on the go. It fits on most RV ladders with an easy hook-on design. It's made of lightweight aluminum and holds two bikes.
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
The Current is our heavy-duty rack which allows for use on either 1-1/4" or 2" hitch receiver. It also has a higher weight capacity per bike at 60lbs, making it e-bike approved and also accommodating Fat Tire bikes with tire widths up to 5"! The Current comes with locking ratchet hooks and a locking hitch pin to keep your bikes and rack secured to your vehicle. It has the ability to tilt away from your vehicle with bikes mounted for rear vehicle access, and it folds up when not in use. This rack is everything you need all in one! - Carries: 1-2 bikes - 1-1/4" or 2" hitch receiver - Weight capacity: 60lbs per bike - Fat Tire bike-compatible up to 5" wide - Tilts and folds away from vehicle while bikes are loaded - Includes locking threaded hitch pin - Rack weight: 59lbs
Our Swagman Contour kayak carrier makes loading and unloading your craft a breeze. The high-density foam padding helps protect the hull from scratching, while the tie-down straps and bow/stern ropes keep the kayak in place while traveling. The universal mounting system fits most cross bars and will support up to 100lbs. - Carries: Single kayak - Universal mount fits round, square and 4.5" oval cross bars - Additional 100mm bolts included to fit larger diameter cross bars - Includes 2 tie down straps with cam lock buckles, plus bow and stern straps - Soft yet firm padding protects your boat from scratching, even around the nose of the rack
Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder
Swagman's most versatile and popular XTC2 bike rack, now with a tilting feature so you can access the rear of your vehicle. A great solution for carrying 1-2 bikes with the secure mounting capabilities of a platform style rack, now with a tilting feature. The XTC2 Tilt hitch-mounted bike rack comes complete with a 1-1/4" receiver bar and a 2" adapter plate, allowing it to easily fit most hitches. The foam-padded hooks help protect the bike frame while using an easily adjustable push button ratcheting system to stabilize and secure the bikes into the wheel hoops that accommodate wheels up to 2.5" wide. This lightweight, easy-to-assemble system, supports most frame sizes, folds into clamshell shape when not in use and tilts away from your vehicle. - Transports up to 2 bikes - Max Load: 35lbs per bike - Fits 20" - 29" wheel sizes - Center arm folds down to allow access to the rear of vehicle without removing the rack - Rack tilts away from the vehicle to allow access while bikes are still loaded - Locking Hitch Pin, Cable, and Fat Tire Trays sold separately - Rack Weight: 30lbs
Swagman's Tailwhip Tailgate Pad makes it easy to load bikes in your truck and go. It's crafted from waterproof tarpaulin and high density foam to protect your bike and your vehicle. You'll love how easy it is to load up bikes for weekend trips, after work excursions, and—most importantly—shuttle runs.
Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar
Fat Tire holder for T2 PRO X
- QR fork mount for storage or transportation - Includes hardware for mounting to factory truck-bed track systems - Durable alloy construction
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.